IDM Solutions
DCIO-H

Q-SYS Audio extenders and converters

DCIO-H | Digital Cinema Input/Output for Q-SYS

Part number DCIO-H

DCIO is a cinema-specific interface that serves as the audio I/O for each screen in a Q-SYS™ enabled cinema complex. The DCIO – along with Q-SYS Cores, DPA-Q amplifiers and DCS loudspeakers – provides a cost-effective…

€3,245.00 excl. VAT

€3,926.45 incl. VAT

iDEAL | Wero, card or bank transfer

Integrators get their own pricing on every quote after registration and verification.

Need help choosing? Call +31 (0)299 292 177 or email info@idm-solutions.nl.

Description

Features

  • Digital Cinema Inputs/Outputs for Q-SYS™ enabled cinemas and cinema complexes
  • Routes inputs/outputs from projector IMB and alternate content sources to Q-SYS Core over Q-LAN, network distribution technology by Q-SYS
  • Mic/line input
  • Line level monitor output
  • Powered monitor output to passive speaker
  • HDMI input/output for non-sync sources (DCIO-H version only)
  • Dolby Audio™ (featuring Dolby Digital Plus™ and Dolby® Surround 7.1) and DTS-HD® decoding (DCIO-H version only)
  • Four relay control outputs
  • HI / VI outputs
  • Automation inputs include RS-232 and GPI
SpecificationsDCIO / DCIO-H
General
Dimensions (H x W x D)1.75 (2 RU) x 19 x 11.2 inches (44 x 483 x 282.5 mm)
Line voltage requirements100 VAC – 240 VAC, 50/60 Hz
Accessories included1m UL/CSA line cord, Euro-style connectors for outputs and relay connections
Front Panel Controls and Indicators
Parameter adjustRotary encoder
Power On indicatorBlue LED
DisplayMonochrome 304x96 blue OLED graphics display
OtherMomentary mute button Mute LED (red) Screen Navigation (Next) and ID buttons
Rear Panel Connectors
Mic/Line inputXLR — Mic (+ phantom power) or line level
Line Input3.5 mm TRS, unbalanced
H.I./V.I. output5-pin Euro-style (x1) – common GND
Monitor Line/Speaker OutputsLine: 3-pin Euro-style, Speaker: 2-pin Euro-style, 10 W max output
Audio Performance
A/D conversion32-bit delta-sigma, 48 kHz
Frequency response20 Hz to 20 kHz (+/- .5dB)
Stereo Line Inputs
Connector3.5mm TRS mini jack
Input stage typeUnbalanced input
Input impedance (4dBu sens)> 10k Ohms
Max analog input level (4dBu sens)15 dBu (4.4 Vrms)
Input impedance (-10dBV sens)2.7k Ohms
Max analog input level (-10dBV sens)1 dBV (1.2 Vrms)
Other
Relay outputs (4)3-pin Euro-style Normally open (NO), normally closed (NC), and common Max 30 VDC @ 1A
Automation inputs (RJ45 - 6 GPI)Max input voltage 5V (3.3V typical) TTL compatible dry contact closure
AES3/EBU InputsCh. 1-8, 15-16 (RJ45 x2)
Automation InputsRJ45, RS-232
Dual Gigabit Ethernet Q-LAN portsLAN A, LAN B (RJ45 x2)
HDMI input/output (DCIO-H only)HDMI 2.0, Type A female connectors
Power switchRocker switch
IEC Power Connector
AES/EBU Digital Inputs (RJ45)
Input stage typeBalanced input
Input impedance110 ohms
Input sample rate48 kHz or 96 kHz
Mic/Line Input (XLR)
Input stage typeActive balanced input
Input impedance2.2k Ohms
Max analog input level26 dBu
Phantom power voltage15V

All specifications are subject to change without notice.

In the same category