The SB-218F enclosure features separate chambers for each transducer. In the rare event of a transducer failure, this prevents over-excursion of the remaining transducer caused by improper box loading. Both models feature 4 ohm impedance, which means that you can use a smaller amplifier to get maximum output from the loudspeaker.
Features
- High output performance with 1600 W / 6400 W continuous power rating
- Eight built-in M10 mounting points for overhead suspension
- 15 mm plywood construction for increased cabinet structural integrity
- 4 ohm impedance for efficient amplifier power
- Side mounted hand holds for easy handling during installation
- Foam-lined perforated steel grille
- Barrier Strip and Neutrik SpeakOn ® connection
| PRELIMINARY Specifications | SB-218F |
| Configuration | 2 x 18-inch, subwoofer |
| Frequency Response (-6 dB) | 37 Hz – 230 Hz |
| Frequency Response (-10 dB) | 32 Hz – 230 Hz |
| Power Capacity 2 : Continuous/Peak | 1600 W / 6400 W |
| Sensitivity (1W, 1m) | 101 dB |
| Output 1 (Peak SPL @ 1m) | 139 dB |
| Driver | 2 x 457 mm (18-inch) drivers with 101 mm (4-inch) voice coils |
| Nominal Impedance | 4 ohms |
| Input Connectors | 2 x NL4, 1 x barrier strip |
| Enclosure | 15 mm plywood, black texture finish. Hand holds on each side |
| Grille | Perforated, powder-coated steel, foam-lined |
| Mounting | Eight (8) M10 threaded mounting points |
| Net Weight | 168 lb / 76.4 kg |
| Shipping Weight | 183 lb / 83.2 kg |
| Dimensions (WxHxD) inches | 46.5 x 23.2 x 25.25 |
| Dimensions (HxWxD) mm | 1180 x 595 x 640 |
1 With QSC processing 2 Power that the device can withstand for 2 hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedances Specifications are subject to change without notice.
